Simultaneous Large Optical and Piezoelectric Effects Induced by Domain Reconfiguration Related to Ferroelectric Phase Transitions.

Electrical switching of ferroelectric domains and subsequent domain wall motion promotes strong piezoelectric activity, however, light scatters at refractive index discontinuities such as those found at domain wall boundaries. Thus, simultaneously achieving large piezoelectric effect and high optical transmissivity is generally deemed infeasible. Here, it is demonstrated that the ferroelectric domains in perovskite Pb(In1/2 Nb1/2 )O3 -Pb(Mg1/3 Nb2/3 )O3 -PbTiO3 domain-engineered crystals can be manipulated by electrical field and mechanical stress to reversibly and repeatably, with small hysteresis, transform the opaque polydomain structure into a highly transparent monodomain state. This control of optical properties can be achieved at very low electric fields (less than 1.5 kV cm-1 ) and is accompanied by a large (>10 000 pm V-1 ) piezoelectric coefficient that is superior to linear state-of-the-art materials by a factor of three or more. The coexistence of tunable optical transmissivity and high piezoelectricity paves the way for a new class of photonic devices.

Neutral and Charged Oxygen Vacancies Induce Two-Dimensional Electron Gas Near SiO2/BaTiO3 Interfaces.

An atomistic model of the SiO2/BaTiO3 interface was constructed using ab initio molecular dynamics. Analysis of its structure and electronic properties reveals that (i) the band gap at the stoichiometric SiO2/BaTiO3 interface is significantly smaller than those of the bulk BaTiO3 and SiO2, and (ii) the interface contains ∼5.5 nm(-2) oxygen vacancies (V(2+)) in the outermost TiO2 plane of the BaTiO3 and ∼11 nm(-2) Si-O-Ti bonds resulting from breaking Si-O-Si and Ti-O-Ti bonds and subsequent rearrangement of the atoms. This structure gives rise to the interface polar region with positive and negative charges localized in the BaTiO3 and SiO2 parts of the interface, respectively. We propose that high dielectric response, observed experimentally in the SiO2-coated nanoparticles of BaTiO3, is due to the electron gas formed in oxygen-deficient BaTiO3 and localized in the vicinity of the polar interface.

Defect-mediated lattice relaxation and domain stability in ferroelectric oxides.

The effects of the lattice strain induced by neutral oxygen vacancies in ferroelectric tetragonal BaTiO(3) and KNbO(3) are investigated using ab initio simulations. We propose that an oxygen vacancy can transform from its metastable equatorial configuration to the stable axial configuration via either diffusion or rotation of the polar axis near the vacancy site by 90°. The latter mechanism, predicted to dominate in materials with slow oxygen vacancy diffusion and low formation energy of 90° domain walls, can stimulate the formation of domains with their polar axes pinned by the vacancies.

Simultaneous measurement of X-ray diffraction and ferroelectric polarization data as a function of applied electric field and frequency.

The characteristics of a new ferroelectric measurement system at the European Synchrotron Radiation Facility are presented. The electric-field-induced phase transitions of Pb(Mg(1/3)Nb(2/3))O(3)-xPbTiO(3) are determined via in situ measurements of electric polarization within the synchrotron diffraction beamline. Real-time data collection methods on single-crystal samples are employed as a function of frequency to determine the microstructural origin of piezoelectric effects within these materials, probing the dynamic ferroelectric response.

A polar corundum oxide displaying weak ferromagnetism at room temperature.

Combining long-range magnetic order with polarity in the same structure is a prerequisite for the design of (magnetoelectric) multiferroic materials. There are now several demonstrated strategies to achieve this goal, but retaining magnetic order above room temperature remains a difficult target. Iron oxides in the +3 oxidation state have high magnetic ordering temperatures due to the size of the coupled moments. Here we prepare and characterize ScFeO(3) (SFO), which under pressure and in strain-stabilized thin films adopts a polar variant of the corundum structure, one of the archetypal binary oxide structures. Polar corundum ScFeO(3) has a weak ferromagnetic ground state below 356 K-this is in contrast to the purely antiferromagnetic ground state adopted by the well-studied ferroelectric BiFeO(3).

Electromechanical coupling and temperature-dependent polarization reversal in piezoelectric ceramics.

Electrostriction plays a central role in describing the electromechanical properties of ferroelectric materials, including widely used piezoelectric ceramics. The piezoelectric properties are closely related to the underlying electrostriction. Small-field piezoelectric properties can be described as electrostriction offset by the remanent polarization which characterizes the ferroelectric state. Indeed, even large-field piezoelectric effects are accurately accounted for by quadratic electrostriction. However, the electromechanical properties deviate from this simple electrostrictive description at electric fields near the coercive field. This is particularly important for actuator applications, for which very high electromechanical coupling can be obtained in this region. This paper presents the results of an experimental study of electromechanical coupling in piezoelectric ceramics at electric field strengths close to the coercive field, and the effects of temperature on electromechanical processes during polarization reversal. The roles of intrinsic ferroelectric strain coupling and extrinsic domain processes and their temperature dependence in determining the electromechanical response are discussed.

Polarization dynamics and non-equilibrium switching processes in ferroelectrics.

Time- and temperature-dependent effects are critical for the operation of non-volatile memories based on ferroelectrics. In this paper, we assume a domain nucleation process of the polarization reversal and we discuss the polarization dynamics in the framework of a non-equilibrium statistical model. This approach yields analytical expressions which can be used to explain a wide range of time- and temperature-dependent effects in ferroelectrics. Domain wall velocity derived in this work is consistent with a domain wall creep behavior in ferroelectrics. In the limiting case of para-electric equilibrium, the model yields the well-known Curie law. We also present experimental P-E loops data obtained for soft ferroelectrics at various temperatures. The experimental coercive fields at various temperatures are well predicted by the coercive field formula derived in our theory.

High-mobility solution-processed copper phthalocyanine-based organic field-effect transistors.

Solution-processed films of 1,4,8,11,15,18,22,25-octakis(hexyl) copper phthalocyanine (CuPc6) were utilized as an active semiconducting layer in the fabrication of organic field-effect transistors (OFETs) in the bottom-gate configurations using chemical vapour deposited silicon dioxide (SiO2) as gate dielectrics. The surface treatment of the gate dielectric with a self-assembled monolayer of octadecyltrichlorosilane (OTS) resulted in values of 4×10-2 cm2 V-1 s-1 and 106 for saturation mobility and on/off current ratio, respectively. This improvement was accompanied by a shift in the threshold voltage from 3 V for untreated devices to -2 V for OTS treated devices. The trap density at the interface between the gate dielectric and semiconductor decreased by about one order of magnitude after the surface treatment. The transistors with the OTS treated gate dielectrics were more stable over a 30-day period in air than untreated ones.

Flextensional ultrasonic piezoelectric micro-motor.

This paper presents the experimental design, construction, and operational characteristics of a new type of standing wave piezoelectric ultrasonic micro-motor. The motor uses a composite stator, consisting of a metallic flex-tensional mode converter, or "cymbal", bonded to a 2-mm-square piezoelectric plate. The cymbal converts contour-mode vibrations of the plate into oscillations in the cymbal, perpendicular to the stator plane. These are further converted into rotational movement in a rotor pressed against the cymbal by means of an elastic-fin friction drive to produce the required rotary actuation. The motor operates on a single-phase electrical supply, and direct control of the output speed and torque can be achieved by adjusting the amplitude and frequency of the supply voltage. Noncontact optical techniques were used to assess the performance of the developed micro-motor. The operational characteristics were developed from the acceleration and deceleration characteristics. No-load output speed (11 rev s(-1)) and stall torque (27 nNm) were derived using high-speed imaging and image analysis. Maximum efficiency was 0.6%.